Newsroom
Pytes introduces a comprehensive lineup of high-voltage, scalable, and safe energy storage solutions — the HV48100, HV48100-SE, and HV48300. Designed to support residential, commercial, industrial, and PV/storage installations, these systems deliver high performance, flexible configurations, and robust safety to meet the demands of modern energy infrastructure.
The HV48100 is a compact distributed energy storage system integrating battery pack, high-voltage control box, and advanced Battery Management System (BMS). It’s ideal for indoor residential use, commercial buildings, factories, and PV systems that require functions such as peak shaving, emergency backup, or supplemental energy storage.
Uses high-performance LFP (LiFePO4) battery cells, with a system cycle life exceeding 6,000 cycles and energy efficiency up to 95%.
Rapid charging: each module can be fully charged in about 2 hours at peak continuous output of 2.56 kW.
Scalable: supports expansion — users can connect multiple modules (or cabinets) in series to achieve larger storage capacity (from 25.6 kWh up to ~40.96 kWh), but also opt for a higher-level, scalable rack solution based on demand, with a maximum expansion capability of up to 76.8 kWh.
Operates safely within the specified temperature range: charge 0~45 °C, discharge ‑10~50 °C.
Note: HV48100 has an IP20 rating and is suitable for indoor environments; it is not recommended for outdoor or humid conditions.
With stable performance and intelligent BMS, HV48100 is a versatile solution for indoor home or smaller commercial setups and PV + battery storage systems.
The HV48100 SE takes the strengths of the HV48100 and transforms them into a rugged, outdoor-ready cabinet system — perfect for larger installations in industrial, commercial, and infrastructural settings.
Built with Tier-1 grade LFP cells and multi-level safety protections, including short-circuit protection and a five-layer cabinet-level fire suppression system.
Operates reliably across a wide temperature range (-20 °C to 60 °C), ensuring stable performance in diverse climates.
Offers high capacity: each unit delivers rated energy up to 76.8 kWh, and supports parallel expansion (e.g., up to 12 units DC-coupled) to scale up as needed.
Smart and flexible: remote monitoring via Pytes Battery Cloud, flexible configuration to match different inverter/input voltage requirements, and robust cabinet design with IP55 for dust and water resistance.
HV48100 SE is therefore ideal when you need a durable, high-capacity, outdoor or commercial-grade battery storage solution that scales with your power demands.
For large-scale commercial and industrial energy storage deployments, the HV48300 delivers the capacity, scalability, and safety you need — a true “central energy hub” for businesses or large PV + storage systems.
Uses Tier-1 automotive-grade LFP cells, with a robust multi-level BMS and a 4-layer active fire suppression system.
Designed for all-weather, indoor or outdoor use: IP55-rated cabinet, air cooling, integrated heating for low temperatures, module-level fans for internal thermal management.
Highly scalable: each cabinet offers approximately 200 kWh of rated energy, with a parallel connection of up to six cabinets per inverter enabling total system capacity to reach the MWh scale.
Compatible with a wide range of inverter models, input voltages, and remote monitoring via Pytes Battery Cloud — making HV48300 a flexible backbone for large commercial, industrial, or utility-scale energy storage systems.
Safety & Reliability
All three models use LFP chemistry — known for thermal stability and long lifespan.
Advanced BMS across all models ensures protection against overcharge, over-discharge, temperature extremes, and short circuits.
For HV48100-SE and HV48300, multi-layer fire suppression and cabinet-level protections add an extra layer of safety, even under demanding installation conditions.
Scalability & Flexibility
Whether you need a small system to support a home or a large-scale energy storage backbone for a commercial site, the Pytes HV series adapts. HV48100 is suitable for smaller indoor setups, HV48100-SE for mid-size or outdoor installations, and HV48300 for large-scale, high-demand energy storage.
Their modular and configurable architecture allows users to tailor capacity, energy output, and voltage ranges — ideal for evolving energy needs or future expansion.
Efficiency & Performance
With quick charging (e.g., a full charge in 2 hours at 2.56 kW per module peak continuous output) and high cycle life (6,000+ cycles), these batteries minimize downtime and maximize long-term value.
Optimized for applications such as peak shaving, emergency power backup, PV energy storage, and commercial energy management — delivering reliable performance across a variety of scenarios.
Residential & small commercial buildings — using HV48100 to store excess solar energy, provide backup during outages, or shave peak loads (indoor use only).
Outdoor or mid-size commercial installations — HV48100-SE deployed at schools, hospitals, retail centers, or agriculture sites that require stable and weather-resistant storage.
Large commercial / industrial / utility-scale storage — HV48300 used in factories, data centers, microgrids, or large PV + storage projects requiring total capacity at the MWh scale with high reliability.
Whether you are installing a small PV + storage system for your home or building a large-scale commercial energy storage infrastructure, Pytes HV series — HV48100, HV48100-SE, and HV48300 — offers a complete, scalable, safe, and performant solution. With high-quality LFP cells, robust BMS, modular flexibility, and real-world scalability, Pytes empowers users to future-proof their energy storage and management needs.
